Home Arabic Magyar - Hungarian Nederlands - Dutch Français - French English
 

Material Safety Data Sheet

SpillAway International Ltd
Unit 21 Barn Way, Lodge Farm Industrial Estate
Northampton NN5 7UW
Emergency Phone: +44 (0) 1604 588760
Information: +44 (0) 1604 588660
 

Section 1 – Product Identification

 
Product: Bio-W™
Description: Bioremedial Absorbent for Hydrocarbon Contamination
 

 

Section 2 – Ingredients Classification

 
Hazardous Components: None
Typical Composition: A mixture of active hydrocarbon oxidising, naturally occurring, single celled organisms. The microbes are contained in an inert preparation of a natural fibrous absorbent which has no chemical impact.
 

 

Section 3 – Hazards Identification

 
Hazardous Components: None
SARA Hazard: Title III Section 313: Not Listed
Fire-(Section 311/312): None Noted
 

 

Section 4 – Emergency First Aid Measures

 
Follow Standard First Aid Procedures:
Swallowing: Call Physician or poison control centre
Skin Contact: Wash affected area with water
Eye Contact: Flush eyes with cool water for at least 15 minutes
Inhalation: Remove victim to fresh air



 
Section 5 – Fire & Explosion Hazards
 
Flash Point & Method Used: 500°F (OPEN CUP)
Flammable Limits: 500°F
NFPA Rating: NO NFPA RATING
   
HMIS Rating: Health: 0 Fire: 0 Reactivity: 0
 
Special fire fighting procedures & precautions: Same As Paper
Unusual Fire & Explosion Hazards: None
 

 

Section 6 – Accidental Release Measures

 
Spill or Leak Precautions: None
Waste Disposal: May be disposed of in normal waste stream according to federal, state or local requirements
 

 

Section 7 – Precautions: Handling, Storage & Usage

 
Although there are no special precautions to be taken in handling, storage or usage of this product that will change its safe use, it is recommended that it be kept at a temperature between 32° F. & 120° F. in order for it to be most effective.
 

 

Section 8 – Exposure Controls & Personal Protection

 
Exposure Limits: PEL: NO OSHA PEL
  TLV: NO ACGIH TLV
   
Employee Protection:
Control Measures: Adequate Ventilation
Respiratory Protection: Dust Mask Recommended
Protective Clothing: None Required
Eye Protection: None Required, but Recommended

 


 
Section 9 – Physical Data
 
Boiling Point: N/A
Melting Point: N/A
Vapour Pressure: N/A
Specific Gravity: H2O=1 0.01 G/CC
Solubility in Water: Insoluble
Appearance: Light Grey Particles
Odour: Lt.Organic
Colour: Grey
pH: 7.0 to 7.1
 

 

Section 10 – Stability & Reactivity

 
Stability: Stable
Hazardous Polymerization: None
Materials to Avoid: Strong oxidising agents & strong acids
Hazardous Decomposition Products: None
Conditions to Avoid: Do not quick freeze or expose to temperatures over 150° F. These temperatures pose no hazard but they are not compatible to this product.
 

 

Section 11 – Toxicological Information

 
Effects of Overexposure:
Inhalation: May cause slight irritation of airways in persons who are acutely sensitive to dust.
Ingestion: May Cause Mild Transient Gastrointestinal Irritation.
Eye Contact: May Cause Mild Transient Irritation. Not Classified.
Skin Contact: Not Classified As A Skin Irritant Or Corrosive Material.
 

 

Section 12 – Environmental Information

 
Environmental Protection: None. This product is environmentally safe even when large quantities are released into the environment.
Spill or Leak Precautions: None
 

 
Section 13 – Disposal Consideration
 
Waste Disposal: May be disposed of in normal waste stream according to federal, state or local requirements
 

 
Section 14 – Transport Information
 
Special Precautions:
None
DOT Classification: Class 55
DOT Proper Shipping Name: Cleaning Compounds
 

 
Section 15 – Regulatory Information
 
DOT Classification: Class 55
DOT Proper Shipping Name: Cleaning Compounds
Other Regulatory Requirements: None
 

 
Section 16 – Other Information
 
This information relates only to the specific material designated & may not be valid for such material used in combination with any other materials or in any other process. The stated M.S.D.S. is reliable to the best of the company’s knowledge & believed to be accurate as of the date indicated. However, no representation, warranty or guarantee of any kind, expressed or implied, is made as to its accuracy, reliability or completeness & we assume no responsibility for any loss, damage or expense, direct or consequential, arising out of use. It is the user’s responsibility to satisfy himself or herself as to the suitableness & completeness of such information for his or her own particular use.
 
SpillAway International
Unit 21 Barn Way
Lodge Farm Industrial Estate
Northampton
NN5 7UW
Phone: +44 (0) 1604 588660
Revision Date: 04/10/2004
Prepared By: Mark Weinberg