FPT-100™ - Non-Bacterial Food Processing Cleaner/Degreaser

FPT-100™ has been developed from our FPT-600™ but addresses contamination issues in senstive areas. Offering a non-microbial and completely odourless, neutral solution to cleaning. This product utilizes innovative technology to remove animal and vegetable greases, oils, starches & lipids from all areas of your plant. At the same time FPT-100™ will remove any hydrocarbons that may be present in production areas from leaking lubricant & hydraulic lines on your equipment. The hydrocarbons include a broad spectrum of petroleum based chemicals including oils, lubricants, greases & solvents.

This innovative technology uses naturally occurring, renewable “Green Chemistry” to remove substances that may cause manufacturing or processing failures. Additionally, when used with our FPT-600™, SEP-700™ Septic System or GTO™ Grease Trap Concentrates, you can be assured of an environmentally safe facility. FPT-100™ is an excellent general purpose cleaner. When used in a general maintenance program, it is very economical to use.

Volumes Available: 1000litre IBC / 205litre Drum / 20litre Cubitainer /

How To Use This Product

FPT-100™ is a highly concentrated liquid. Whichever procedure you decide to follow, you must mix this product at a minimum ratio of 15 parts water to 1 part FPT-100™ in order for this product to work effectively. You may add more water, if necessary, for economy or as your application may dictate.

PRESSURE WASHER PROCEDURE:

1. Insert the mixing tube of the pressure washer directly into the spout of the container.
2. This product must be mixed at a minimum of 15 parts water to 1 part FPT-100™.
3. Adjust concentration levels as appropriate.
4. Apply the mixture directly on the area you wish to clean and degrease.
5. Use the "pressure" to aerate and agitate the "stubborn" areas.
6. Allow the area to remain wet for as long as possible.
7. Very old stains may need several applications.

MANUAL SPRAYER & BRUSH PROCEDURE:

1. Pre-mix FPT-100™ in an industrial sprayer at an appropriate concentration level.
2. This product must be mixed at a minimum of 15 parts water to 1 part FPT-100™.
3. Spray the stained area with the mixture, being sure to cover the area to be cleaned.
4. Wait a few minutes before going to next step.
5. Agitate and aerate the area with a stiff brush or broom.
6. Allow the area to remain wet for as long as possible.
7. Very old stains may need several applications.

Applications

In addition to animal & vegetable fats, grease, oils, lipids and starches, FPT-100™ will remediate the following contaminants. Please contact SpillAway™, if you have any questions about its usage: