FPT-600™ - Bioremedial Food Processing Cleaner/Degreaser
FPT-600™ is
a unique concept in the cleaning, maintenance & remediation of troublesome
contaminants in the food processing industry. This product utilizes Bio-Remedial
technology to literally “eat” animal and vegetable greases, oils, starches
& lipids from all areas of your plant. At the same time FPT-600™
will remediate any hydrocarbons that may be present in production areas
from leaking lubricant & hydraulic lines on your equipment. These hydrocarbons
include a broad spectrum of petroleum based chemicals including oils, lubricants,
greases & solvents.
This Bio-Remedial technology uses naturally occurring micro-organisms to
degrade all of these substances that may cause manufacturing or processing
failures. As a secondary benefit, when used with our SEP-700™
Septic System Product, you can be assured of an environmentally safe facility.
FPT-600™ is
compounded with special “Bio-Nutrient” compounds to accelerate the Bio-Remedial
process & render the polluting compounds harmless to your equipment, your
employees & the environment. The by-products of this natural process are
CO2 (Carbon Dioxide) and water. FPT-600™
is an excellent general purpose cleaner. When used in a general maintenance
program, it is very economical to use.
Volumes Available: 1000litre IBC / 205litre Drum / 20litre Cubitainer /
How To Use This Product
FPT-600™ is a highly concentrated liquid. Whichever procedure you decide to follow, you must mix this product at a minimum ratio of 15 parts water to 1 part FPT-600™ in order for this product to work effectively. You may add more water, if necessary, for economy or as your application may dictate.
PRESSURE WASHER PROCEDURE:
- Insert the mixing tube of the pressure washer directly into the spout of the container.
- This product must be mixed at a minimum of 15 parts water to 1 part FPT-600™.
- Adjust concentration levels as appropriate.
- Apply the mixture directly on the area you wish to clean and degrease.
- Use the "pressure" to aerate and agitate the "stubborn" areas.
- Allow the area to remain wet for as long as possible.
- Very old stains may need several applications.
MANUAL SPRAYER & BRUSH PROCEDURE:
- Pre-mix FPT-600™ in an industrial sprayer at an appropriate concentration level.
- This product must be mixed at a minimum of 15 parts water to 1 part FPT-600™.
- Spray the stained area with the mixture, being sure to cover the area to be cleaned.
- Wait a few minutes before going to next step.
- Agitate and aerate the area with a stiff brush or broom.
- Allow the area to remain wet for as long as possible.
- Very old stains may need several applications.
Applications
In addition to animal & vegetable fats, grease, oils, lipids
and starches, FPT-600™
will remediate the following contaminants. Please contact SpillAway™
if you have any questions about its usage: