HC-300™ - Cleaner/Degreaser
HC-300™
is our professional product for the bio-remediation of deep soil and ground
water hydrocarbon contamination. This formula was developed to help solve
contamination situations that demand minimal disruption to surrounding environments
while maintaining economic feasibility. HC-300™
affords you the ability to reach deep into contaminated areas, perform in-situ
bio-remediation, realize dramatic material & labor savings and accomplish
remediation goals in a short period. HC-300™
is a blend of naturally occurring, live synergistic micro-organisms that are
chosen for their exceptional ability to bioremediate hydrocarbons rapidly.
SpillAway™ can
custom blend this product for your specific needs and unique contamination
problems.
Volumes Available: 20litre Pale inc. Associated Nutrients
How To Use This Product
Below we have detailed a basic protocol for ex-situ bioremediation
of soils using a windrow or "bio-pile" technique. However, the application
of HC-300™ and our
other soil remediation products will vary greatly depending on site specific
conditions. To find out more about the application techniques available(we
are abale to treat both deep and shallow level contamination with in-situ
or ex-situ techniques), view our case studies or contact us.
HC-300™ is supplied
in 20 litre pales, included with the product is a nutrient pouch. Each Pale
of the product must be well shaken and diluted at 5:1 with water, the nutrient
pouch must also be added to the diluted product before use. A dosage of
5 diluted litres per m3 (cubic meter) should be applied in two parts via
broadcast spray.
- Extract soil samples for analytical testing
- Dilute HC-300™ with water at a ratio of 5:1, the product should be well shaken before dilution - this will give 100 litres of diluted product
- Add the enclosed nutrient pouch to the diluted product
DO NOT ADD NUTRIENT TO UNDILUTED HC-300 - The application process will be in two parts
- The first part is to apply the diluted product by broadcast spray at a dosage of 2.5 diluted litres per m3
- The windrow must now be turned
- Apply a second dose again via broadcast spray at 2.5 diluted litres per m3
- Cover windrow with geo-textile or similar
- The windrow must be kept damped down and moist at all times. Do not allow to dry out
- Monitor bioremediation progress with analytical testing
Applications
The following is a partial list of the contaminants that
HC-300™ can treat.
Please contact SpillAway™,
if you have any questions about its usage: