Home Arabic Magyar - Hungarian Nederlands - Dutch Français - French English

Liquid Remediact™ - Cleaner/Degreaser

Liquid Remediact™ is a newly developed product that was created to solve soil & water hydrocarbon contamination problems. This product has the ability to bio-remediate most hydrocarbons with a minimum amount of equipment, labor and cost. What sets Liquid Remediact™ apart from all other products is the high concentration of live synergistic bacteria, in a remediation liquid, that quickly starts the bio-remediation process. Because of it's relatively low cost, Liquid Remediact™ is the ideal solution for most industries to solve their own hydrocarbon contamination problems.

Volumes Available: 1000litre IBC / 205litre Drum / 20litre Cubitainer


How To Use This Product

Below we have detailed a basic protocol for ex-situ bioremediation of soils using a windrow or "bio-pile" technique. However, the application of Liquid Remediact™ and our other soil remediation products will vary greatly depending on site specific conditions. To find out more about the application techniques available(we are abale to treat both deep and shallow level contamination with in-situ or ex-situ techniques), view our case studies or contact us.

Liquid Remediact™ is supplied in 20 litre cubitainers. Each Pale of the product must be well shaken and diluted at 10:1 with water. A dosage of 5 diluted litres per m3 (cubic meter) should be applied in two parts via broadcast spray.

  1. Extract soil samples for analytical testing
  2. Dilute Liquid Remediact™ with water at a ratio of 10:1, the product should be well shaken before dilution - this will give 200 litres of diluted product
  3. The application process will be in two parts
  4. The first part is to apply the diluted product by broadcast spray at a dosage of 2.5 diluted litres per m3
  5. The windrow must now be turned
  6. Apply a second dose again via broadcast spray at 2.5 diluted litres per m3
  7. Cover windrow with geo-textile or similar
  8. The windrow must be kept damped down and moist at all times. Do not allow to dry out
  9. Monitor bioremediation progress with analytical testing

Applications

The following is a partial list of the contaminants that Liquid Remediact™ can treat. Please contact SpillAway™, if you have any questions about its usage:

  • Diesel Fuel
  • Heating Oil
  • Gasoline
  • Benzene
  • Paraffin
  • Lubricating Oil
  • Paint Thinners
  • Alcohol
  • Toluene
  • Mineral Spirits
  • Motor Oil
  • Aromatics
  • Ethylbenzene
  • Jet Fuel
  • Cutting Oil
  • Glycols
  • Crude Oil
  • Kerosene
  • Organic Pesticides
  • Organic Herbicides
  • Transmission Fluid
  • Xylene
  • Organic Solvents
  • Grease
  • Tars
  • Naphthalene
  • Anti-Freeze