Spill Control Made Simple
As well as being able to supply conventional spill kits,
SpillAway™
have developed a range of products that can be used to bioremediate hydrocarbon
spills both on land and in water. As with all bioremedial products in the
SpillAway™
range all resulting run-off is reduced to water and CO2.
In the case of porous surfaces, not only will our products clean the surface,
but also soak in and bioremediate contamination that has managed to penetrate.
This is particularly effective in garage forecourts, drives, parking areas
and other areas where consistent leaks and spills from vehicles occur.
Using SpillAway™
products will not only improves our clients response times to spills but
does so efficiently and safely whilst reducing hazardous waste disposal
charges. With FleetKleen™
and SpillAway+™,
our products are so effective that floors can be restored with no residues
immediately, bringing working areas back on-line in the best times with
no risk of slips or trips.
FleetKleen™
FleetKleen™
is our universal cleaner/degreaser that can be used to cleanse all solid
surfaces. In large scale emergency spill situations FleetKleen™
can be used to quickly and effectively restore surfaces, leaving them slip
free and skid resitant, ensuring your workers safety whilst bringing work
areas back on line as quickly as possible. In addition FleetKleen™
will follow contamination both into porous materials and through water courses,
bioremediating contamiants and helping reduce environmental impact and associated
hazardous waste charges and fines.
SpillAway+™
SpillAway+™
absorbent powder is our answer to rapid spill response
and control. Unlike other spill products that merely get coated with contaminants
(ADSORB), SpillAway+™
actually creates a physical bond with contaminants (ABSORBS), locking it
into it's structure. As such, SpillAway+™
will not leach, will leave all surfaces completely and immediately slip
free and skid resistant and can be re-used between 5 to 10 times before
disposal is necessary. This is the perfect solution to both small and large
spills of oil, grease, diesel, petrol, glycol, solvents and much more.
Bio-W™
Bio-W™
is the first bio-remedial, floating absorbent designed to absorb and control
hydrocarbons on water. This product has the ability to repel water, allowing
it to "hold" only the hydrocarbon it absorbs. When the hydrocarbons are
"locked" into the fibres of Bio-W™
the microbes will begin to bio-remediate the contaminant turning the hydrocarbon
into harmless carbon dioxide (CO2) and water. Bio-W™
will float even when fully saturated and will not leach or drain.
HC-200™
HC-200™
is a professional product for in-situ bioremediation of hydrocarbon contaminated
oily water, groundwater plumes & industrial wastewater, ponds and lagoons.
This formulation was developed to rapidly degrade the major components of
BTEX, higher range aromatic and aliphatic compounds. Application is non
disruptive to the surrounding environment and maintains high economic feasibility.
HC-200™
affords you the ability to reach deep into contaminated water, perform in-situ
bio-remediation, realize dramatic material & labour savings & accomplish
remediation goals in a short time period.
Spill Kits
By using a mixture of comtemporary spill kit media such as pads, socks and
oil booms along with the specialist SpillAway™
bioremedial spill response products listed above, SpillAway can provide
our clients with customised spill kits to suit all industries and to tackle
all evntualities.